24 November 2011

SHOP: repair a cracking coaming

.

In a previous post I mentioned that I reinforced the under-deck thigh brace area surrounding the coaming where I had hairline cracks appear in the coaming-deck junction.
Adventuretess' kayak (and several other ones of the same make) had the crack develop at the front of the coaming.
It appears that the deck is a a bit weak there, where the tight radius of the laminate meets the coaming, flexes too much and the gel coat cracks because is not elastic enough.
A friend of mine repaired the same type of crack on his kayak by reinforcing the underdeck and inspired me to stiffen up  Adveturetess' kayak too.
cracking deck_coaming
crack in the deck along the front of the coaming
I suspended the kayak on slings from the ceiling, turned it upside down and brought it to shoulder height; it is much easier to work inside the cockpit of an elevated kayak than bending over on the floor.
I made sure that the area was first thoroughly washed with fresh water, dried and then cleaned with acetone. I inspected the laminate but it didn't show any cracks in the fabric.
For the reinforcement I used scraps of carbon fibre cloth (unidirectional and woven), but quality fibreglass cloth could have been used instead; carbon fibre is just a bit stiffer.
dry lay up
(wire and reed for magnetic switch showing)

I chopped the cloth into short strips so they were easier to lay around a curved shape. I used several layers of carbon cloth, overlapping. I exclusively use West System epoxy for my work and for this area, exposed to daylight, I mixed 105/207 since it's UV stabilized. Epoxy allows me to work in small batches, does not produce too many toxic fumes and has excellent adhesion to most composite laminates.
I often hear that paddlers are scared to use resins and do their own repairs. Mixing epoxy is dead easy and is feels like watery honey. If you clean the area to be repaired repair well and keep the work tidy a job like this one is not more difficult than smearing honey onto a cloth, really.

wetting out layer1

I saturated the carbon cloth making sure there was enough resin against the kayak deck, pushing the fabric into the tight curve of the under deck. I finished the repair with a top layer of fine fibreglass twill cloth to create a smooth surface while absorbing possible excess epoxy.
glass layer
Top layer of fine fibreglass. Resin only partially saturating the cloth.
After all the layers were saturated (white fibreglass becomes transparent) I cleaned up any spills on the exterior of the coaming with methylated spirits (alcohol).
clean up

I left the epoxy cure for 24 hours (25C temps) and then smoothed any fibreglass spikes with sandpaper.
sanding

I am not sure if I will repair the cosmetic hairline crack on the outside of the deck since I don't have the factory matching gel coat from Valley. It takes a fair amount of trial and error to mix up the perfect tint to match the color.
The deck now feels very solid and the hairline crack does not expand when pressure is applied.

.

08 November 2011

GEAR: Flat Earth Sail Code ZERO

Flat Earth Kayak Sails has provided me with a new sail for testing.
I have been very satisfied with the design and quality of Mick's sails in the past and I now use them exclusively on all of my kayaks.
I believe the design is superior to the ones I designed and they are easier to use.
While Mick can supply a complete sail set (sail, mast, deck fittings and sheet) I use my own rig that is slightly different to his standard approach.
I was keen to try his high mounted sails with the stays below the boom for this new sail but I realized I would have to modify some deck anchors so I decide to simply slip the new sail on my existing mast and stays; there has been no modifications to the rigging.
The new sail uses Code Zero sail cloth: a very thin but very dimensionally stable material that has reinforcement filaments laminated into the surface.
The material does not stretch and does not wet out as much as conventional sail cloth keeping the sail light and maintaining its shape when dunked in the water.
I still remember the difference a wet or dry sail made when I used to windsurf: after a water start the sail seemed sluggish and slow to gradually become more taught as the sail would dry out. Once fully dry the fabric would shrink and the sail was “fast” again. I am not sure if the surface area of a kayak sail is affected as much as a windsurfing one but having a dry fabric seems an advantage to me.
FEKS3_1_gdn
FEKS Code ZERO 1 meter, fully deployed
The sail is shaped differently than my other two FEKS: the shape is fuller and closer to the mast that flattens out towards the rear. There are more panels sewn into this sail to create the efficient shape. Mick’s sails seem to be less susceptible to wind change directions and they don't need constant trimming to get the maximum power from them, if compared to my own designed sails. In other words they are more forgiving. What makes them even more user friendly is the shock absorption built into the main sheet. When the sail is hit by a gust of wind the bungee cord stretches and spills some of the wind to possibly prevent a capsize of the kayak.
My new sail is rather large: 1.0 m². For a sea kayak sail that large surface can become a handful in higher winds (let’s say above 20knots).
When on a kayak sailing outing on a few occasions I had to lower my sail and stow it away when the wind picked up beyond what I could comfortably handle in my kayak; the sail was just too big for the stiff breeze.
Mick has engineered a simple solution to reduce the sail area (reef) and make it still usable in higher winds.
FEKS3_2_gdn
reefing points with simple Dyneema loops
I have used a very thin Dyneema line to create simple loops that can tie around the mast and hold back a section of the sail . The reduced area (0.5 m²) is much more manageable when the wind really blows. Unfortunately I have not come up with a solution on how to reef the sail by myself when seated in the cockpit; I need somebody’s help to do so.
FEKS3_3_gdn
sail reefed to reduce the surface area
My first outing with the Code Zero consisted of a short trip to a small island and back across a tidal flow channel. Initially the breeze was very gentle (just a few knots) to suddenly change to a solid 10-15 knots with several higher gusts.
The sail performed very well in those breezes but I had no opportunity to try it in something more challenging to the point to have to reef it and observe its performance when the surface of the sail is reduced.
FEKS3_4_gdn
in this configuration the sail can be used in higher winds without overpowering


The Code ZERO sails will be available in a limited edition in early 2012.

.

02 November 2011

Don't renounce the customer service

As a dedicated sea kayakers I usually seek specialized equipment to purse this highly-technical gear-intensive sport. Such equipment is generally not available from big box stores but is rather sourced from the knowledgeable and educated staff of dedicated paddling shops.
Well established businesses that have been around for a long time owe their success to a number of factors but, in this small tightly-knit community of skilled kayakers, one very important aspect of retail is customer service.
It seems that aggressive advertising can lead to a healthy customer base too since often paddlers are willing to give the "new guy in town" a go.
The initial success however must be backed by a solid customer service or the buyer has the same security of purchasing gear as on eBay.
day 134 - 10.01.2009 - high key frustration
Photo: Arden
As an avid consumer of outdoor gear I have purchased (way) more than the average share of equipment throughout the years.
I do my shopping locally, if I can (if the desired items are available for a reasonable comparable price), or I shop online to source the exotic equipment that most local retailer have not heard of.
When purchasing online I buy almost exclusively from trusted vendors that offer a serious warranty policy: if it does fail they will replace it, unconditionally.

Wow! Is that true: unconditional guarantee? How can that be possible? How can they stay in business? one might ask...

The concept of an unconditional guarantee was pioneered in USA by LL Bean in 1912.
Unthinkable at the time, he started to offered unconditional warranty replacement on items that he sold in his store. The concept was so progressive that naysayers were convinced he would be bankrupt in very short time.
Well, his retail concept worked and against all odds he became very successful.
Many vendors followed his idea and equally succeeded including now the biggest retailer of outdoor gear in the world: REI.

This policy incites me to have no reservations purchasing from a retailer that genuinely backs its products by a warranty that can be claimed when things fail.
Unfortunately not all items that I purchase are from these vendors since some highly specialized gear is not main stream and is available from only selected retailers that don't have this policy.
I have purchased several items that I wished were sourced from vendors that would back up faulty equipment.

I have noticed a recent increase in dissatisfaction from local and interstate paddlers with the purchase of some British boats. Several high end kayaks have displayed problems in manufacturing ranging from poorly assembled decks, hulls and coamings to problems in the laminate.
I had my share of bubbles in the gel coat where the fibreglass was not laid out carefully in the factory but I repaired those voids myself without inconveniencing the retailer of the kayak or the manufacturer. I did not have to and I could have had it done professionally and billed the retailer.

void on keelline_gdn
laminate problem on the keel line
I had also a couple of imported kayaks that had problems with the construction of the laminate and could not be repaired to a satisfactory level. I had to negotiate a deal with the manufacturer and eventually had those kayaks replaced.
I am also aware of the same laminate problem on a kayak in Tasmania and the customer has never had the kayak replaced. He is stuck with a kayak that is faulty.
Several other customers have come forward with faults on their kayaks.
Some problems were rectified by the owners of those kayaks but in too many cases the retailer has simply washed his hands of the problem.
High end sea kayaking retailing is based on repeated custom or word-of-mouth advertising; poor customer service is giving these retailers a bad reputation and is very damaging.
While their business seems to be still thriving now, eventually it will suffer.
They are not dealing with teenagers that assume faulty equipment is just the nature of the product: cheap and with a short lifespan.
Sea kayakers are demographically more mature and value good after sale service; failing them is shortsighted.

photo: Chris Walker

.

20 October 2011

Photo: balanced brace

Balance brace with NLP_1
Adveturetess just floating and stretching her back.
The balanced brace is the foundation to many Greenland rolls.
Once a paddler masters the balance brace he/she can roll with so much more grace using the body to turn the boat, not the resistance or momentum offered by the paddle or hand.
Unfortunately I am not flexible enough to balance brace and  my Butterfly rolls are performed with force and momentum with plenty of support from the paddle.

.

18 October 2011

GEAR: Greenland spare paddle on rear deck

With the recent shipment from Northern Light  I now have a high quality spare paddle on the rear deck of my kayaks.
I paddle exclusively with traditional style paddles and so far I have been forced to carry a Euro paddle as a spare.
I rarely had to use my spare but it would be unwise to venture out at sea without one; after all if I lost/broke my main paddle I would be left using just my hands or having to be towed.
My DIY split Aleut paddle was never tested in rough waters but I am not sure if it would have held up.
Some paddlers (Greg Schwarz for example) carry a full size GP on the front deck of their kayak.
I tried to configure a way to carry a full size on my kayak but the deck is shaped differently and just would not work. A full size paddle would not sit flat and would protrude too far outside the deck risking to catch a wave in heavy seas and possibly dislodge.
My Zegul 520 doesn't lend itself to have a split paddle up front either; really the best place it the rear deck.
Northern Light sectional carbon paddles seem to almost have been designed in conjunction with that kayak; the split NLP sits incredibly well in the recess of the deck.
NLP on read deck_6

NLP on read deck_3

No other paddle that I have tried sits as secure and has such a low profile.
Retrieving the NLP is much easier than my Euro paddles, that must be secured by a tight bungee wrapped around the shaft to prevent dislodging in heavy seas.
While the carbon Greenland is a real strong paddle I was wondering what would happen if I had to retrieve and assemble one in bumpy conditions.
Would the inserted shaft really fit tightly enough to paddle for a while and, without being screwed together, not come apart?
Well, I never really tried it but I didn't want to find out by accident.
I kind of like things to be really secure and after discussing the idea with Paul from Northern Light I sourced a little plastic plug that can be just pushed into the metalthread instead of having to use the Allen key stainless steel screw.
Xmas tree plug_2_c
Of course I will remember to have a few of those nifty plugs handy in my PFD.

Xmas tree plug_3_c

After some testing, the plastic plug seems to really secure the paddle together and no amount of pulling managed to separate it.
The NLP approach to positively assemble the sections with fasteners instead of a snap-together style joiner is in my experience a better solution.
On my carbon Euro paddles the so beautiful tight joiner, that would fit perfectly together when new, soon developed a bit of slop; eventually the paddle would wobble so bad that it needed to be replaced, luckily under warranty.

An alternative to a full size paddle it to carry a Northern Light paddle in the "storm" format.
Every NLP comes with a joiner that transforms a full size paddle into a short one that has a very short loom. A storm paddle sits perfectly fully assembled on the back of my deck without much protrusion past the stern.
NLP on read deck_5
NLP on rear deck in "storm" configuration
 A storm paddle is a fully functional alternative to a full size GP but it takes a bit of practice to develop a solid sliding stroke.
A skilled paddler can use a storm GP as efficiently as a full sized one but for now I am not confident to use a storm paddle in the surf; my rolling however seems to be unaffected.

.

15 October 2011

Weather: dodging bullets

Outings planned for the last two Saturdays had to be amended because the spring weather that has been rather erratic.
Usually a bit of wind or rain does not bother me but the recent thunderstorms have been intense, so I pay attention when they are forecasted.
Vanilla at Cape Byron_2 (c)

Lightening should be avoided when on the water since the tallest object often happens to be myself.
A carbon paddle is very conductive and, as pointed out to me by Paul at Northern Light, I did not want to become the guy who "Put another kayak on the barbie" (quoting Paul Hogan's Australiana).

















A careful assessment of the forecast indicated that I had enough time for a quick outing to my favorite destination (Peel Island) and back in time before the afternoon storm.






























Notice the sudden increase of wind speed!
I kept a watchful eye on the distant horizon to see if any mushroom clouds were forming but the storm only hit once I was back at home with kayaks stored in the shed :-)
A change in weather against the forecast would see me sit out the brief storm on the shore of the island to then resume my paddle once the storm had passed (it only lasted 1/2 hour).


.

11 October 2011

VIDEO: true artist

I have come across this video of Warren Williamson Greenland rolling the new Pygmy Murrelet.
This guy really has incredible skills.



Warren is a true artist at his craft and can execute Greenland rolls with finesse that is just jaw dropping.
As well as being such a smooth roller Warren can also rip it up in tidal races, not to forget him trailing just behind Wayne Horodowich in speed races, all done with a GP.

.

DIY: nose clip for rolling

.

As my sea kayaking advanced I realized that rolling was going to become a necessary skill.
I started to venture into the surf zone and inevitably I was getting tipped over.
"Cowboy" self recoveries in the bumpy seas didn't work for me and assisted rescues became tiring.
I had to learn to roll.
For my first rolling lessons I used a snorkeling mask that allowed me to see what I was doing underwater. I didn't like the feel of the mask but I guess it was necessary, as a novice, to be able to orient myself underwater.
Once I got the basic roll down I realized that to become proficient I had to practice my rolling regularly, not just twice a year or so. I wanted to roll every time I would be on the water but I didn't always pack my mask with me. If I did, it was a pain the get it out of the dayhatch and put it on my face.
I tried rolling without a mask but water seems to get into my nostrils and sinuses when hanging upside down. It was OK for a fast few "combat" rolls but I could not do it for an extended rolling session.

I noticed that good experienced rollers were using nose clips and the diving mask was more kind of a "beginner" tool, I thought. Unfortunately the common nose clips sold at sports stores (used for swimming) did not do the trick: they were too small and didn't stay on when rolling repeatedly.
I purchased specialized white water nose clips that honestly are way overpriced.
Those noseclips finally sealed my nostrils but the bridge is made of rather too soft metal that seems too loosen up and bend open again. I had to squeeze that clip again and again to reposition it too frequently. I knew I could make better nose clips than the commercially available ones. The key was sourcing the right materials.
For my nose clip's spring I found that bicycle spokes would offer just the right amount of resistance, could be bent into shape and above all, they are made of stainless steel so the clip would not rust.















I use pliers to shape the spoke into a gentle even curve making sure it's wide enough to go over the nose.
















I add a couple of loops at the end of the clip to create a platform for the pad material.































I use diagonal cutters to trim the excess spoke off to close the loop neatly.















These noseclips would be rather spartan and probably would hurt if they didn't have some cushioning pads that spread the load over a wider area and create a better  squeeze on the nose.
Steavatron found this incredibly nifty material: Sugru.
It feels like putty but cures to a rubbery silicon.
I shape the material with my fingers over the end loop on the nose clip and smooth it out to a pleasant surface.































I let the finished noseclips air cure for 24 hours and the putty becomes solid but not hard. Sugru is indeed  a great material that could be used in so many DIY projects.
I attach a clip with a thin string to each of my PFDs and tuck it away in a pocket to have it ready to use at any time I plan to bust out a couple of rolls.
The clip is compact and very effective. I no longer have a stream of water run out of my nose at the least opportune moment hours after I have finished rolling (like ruining my lunch :-) )
And the snorkel mask?
These days I feel that is best used for finding out hidden treasures under the seas.


.

06 October 2011

VIDEO: Tidal Race Surfing with hard chined kayaks

.

We can only watch and envy the brilliant conditions that some sea kayakers have. Where I live there are no tidal races worth playing on with a sea kayak: there are no decent standing waves to surf.
What we have to content ourselves with is a medium tidal flow (up to 3 knots) over a flat sea bed that produces just ripples.

But not all is lost: given the right conditions one can find a mock tidal race.
If a strong wind opposes fast flowing water moderate size waves are created and caught on the right day one can dream to be at the Skooks (not really).
The waves are generally short and not really standing: they form and peak for a short time and then fall again.
The flow is there but the waves are not constant; getting a ride on one of those waves requires a bit of effort (furious paddling) that is rewarded with a short glide.
It is similar to short wave surfing but the waves generally don’t crest and break.
The weather forecast was indicating that Sunday was going to be rather windy (20-30knots) and touring onthe Bay would have been hard work (unless we decide to kayak sail).
Since the tide was flooding to midday and the wind would be pushing against the flow, in the morning we hoped to find a spot that would produce waves to play in.
It was weird to be pointing the bow out to sea to surf our kayaks, usually one would be coming in with the waves onto shore.


select 720p if you have fast Internet connection

 

I find that an ideal boat for such conditions is a shorter sea kayak with rounded chines that can be edged well and that is responsive to the paddler’s input.
A short British style boat comes to mind where one does not rely on the rudder to manoeuvre the boat but uses the hull shape turned on its edge to carve a turn.
My Zegul 520 is not exactly a boat that fits that description; it’s a bit on the long side (at the waterline) with not a lot of rocker and it’s hard to turn since I find that with my weight the extended keel does not released when edged. A lighter person would find the same kayak perform way differently.
I have kayaks that would surf those conditions way easier than this hard chined, low rocker narrow low volume boat.
So why do I use it? Because it’s challenging and makes me a better kayaker.


I assume it must be the same reason why some motor enthusiasts disable the auto traction control to have “more fun” when driving their cars aggressively :-)
Probably why some mountain bikers choose to run a single speed on steep and rough terrain instead of a cluster of gears.
I have to work hard not to fall in the water; hard chined boats are less forgiving as rounded ones. I am heavy and I push the hull deeper into the water; edging the narrow hull does have less effect on manoeuvrability compared to my higher volume British style kayak. I have to sweep stroke aggressively to make that kayak turn.
The kayak does bury her bow into the water when surfed down a steep short wave and gives me a few moments of mild panic hoping it won’t pitch me over.
Hard work but more fun since it keeps me on my toes.


Greg Schwarz also likes his hard chined low profile/low volume kayak for surfing small waves. His kayak is maybe  a bit shorter than mine (at waterline) and has less volume, it's more manoeuvrable but requires good technique to keep it upright in textured water. He finds the Tahe Greenland an excellent kayak for rough waters but Greg is a very skilled kayaker.
With a shorter waterline that helps quickly accellerate the kayak down the wave, the flat bottom puts it on the plane to allow fast runs. Turning that kayak is a real breeze. Carved turns are very effective but sloppy technique would make using that kayak in rough water a handful.
I feel that hard chined kayaks seem to surf better than round hulled ones as long as I concentrate and handle the grabby nature of hard chines.
In the meantime I am learning on how to become more relaxed in bumpy conditions trying to gain better balance.

.

03 October 2011

Photo: fun surfing on a tidal race

This is the closest I can get to enjoy a "standing wave" on a tidal race: surfing wind formed waves on a fast tidal flow.

Tidal Race surfing_1
hard chined kayak with Northern Light Greenland paddle


Video coming soon
.