REVIEW: Northern Light Greenland paddle

I have been looking for a sectional traditional paddle for a while now. My attempt to create one was OK for a “spare” paddle that I would use in emergency but somehow that short coupling was not going to cut it for demanding situations: I would not use that paddle in the surf. Recently Paul from Northern Light offered me one of his three piece carbon fibre paddles and asked me if I wanted to review it.
I was interested in the concept of a paddle that breaks down into a shorter length that could easily be stowed onto the deck of my kayak since full length paddles just don’t fit that well.
I used to carry around a split Euro paddle but I would hate to use it: these days I find paddling with a EP just weird :-)


I had the opportunity to use the Northern Light Greenland paddle recently and I put in a few miles with it.
My initial concern was: is this 3 sections paddle going to be strong and wobble free?
The paddle assembled easily but with a firm feel. Just a bit of force is needed to insert the central loom section into the reinforced blades.
Northern Lights idea here is to have a paddle that would be functional even without fitting the fastener, when in a hurry.
There are however very nice stainless steel countersunk metalthreads that firmly hold the paddle together. A metric hex key tool (Allen key) is supplied with the paddle. A few short turns of the key secure the sections into a very solid one-piece paddle with no play.


I don’t have an accurate scale to weight the paddle but Pauls told me that the test paddle supplied was 898 grams. To me it felt just a bit heavier than the one piece balsa cored carbon skin Black Stick but lighter than my super strong beefy laminated Vanstix “battle stick” I use for surfing.
When Paul and I started writing I showed him a picture of Greg Schwarz's Black Stick and Paul wrote back that it was absolutely gorgeous but was concerned with the comparison. He wanted to stress that his paddles were designed for travel and abuse and while Greg's shiny paddles were stunning, he wanted something different. He knew comparisons were inevitable, but he said we were really talking apples to oranges as one was a one piece paddle and the other a three piece.
Northern Light sectional paddles emphasis is on strength (the blades are reinforced internally with carbon fiber and Kevlar making for a nice stiff but not too stiff paddle). Paul told me that he definitively wanted overkill on the blades to ensure they were strong and tough.
My sample paddle might not have the absolute perfect mirror shiny surface of the Black Stick but I find the finish on the Northern Light impressive. It has a slightly pearl look to it.
There are no rough/sharp edges to cut my hands on when sliding the paddle around in an extended position.
The edge of the blade is thin but not excessively; it sits nicely in the hand and doesn’t hurt when sculling.


I found the paddle very quiet. I purposely tried to induce vortices of air in a forward stroke without canting. When looked in profile, the surface of the blade does have a small concave running most of the length of the surface.
Maybe that little detail makes the paddle so easy to use?
The loom however is not typical. It is ovalized but has two distinct flat surfaces. I thought that the unusual shape would be a concern. I found the position of my hand on the shaft very agreeable, not unlike my Vanstix Aleut shaped shaft. I found that the thumb rested nicely on the flat surface.
The fasteners were out of the way of the hand position and only when I extended the paddle I could feel the small seam on the joint. I could barely notice it and did not annoy me.
Speaking of looms: I asked for one that would match my overall existing GPs length. The looms can be custom ordered to suit paddlers' dimensions. I believe a 90" paddle can be ordered, down to a minimum of 83". Now that's custom sizing :-)

Paul also supplied a very small “loom”. Actually it’s just an insert that holds the two blades together.
It took only a minute to remove the standard loom and replace it with the joiner. I now had a storm paddle.


Greg had a good rolling session with that short paddle and he liked it.
I am not sure if it was a slip of tongue but I might have heard him saying that the Northern Light felt very similar to his paddles, minus the loom :-)
Overall the carbon Greenland paddle felt very good.
There was no obligation on my part to keep the paddle if I didn’t like it but this one is not going back.
I am now interested in trying the Aleut paddle that Northern Light offers.
Next time I head out for a surf session I will take the Northern Light and see how it performs in the rough.



.

Review: Northern Light sectional GP

Northern Light: an affordable three piece carbon Greenland paddle.





Review coming soon

VIDEO: winter rolling with Stika

The lower temperatures and settled weather produce clearer water here in Queensland.
The January floods that tainted the waters of Moreton Bay are just a memory and once again rolling in a kayak is a pleasure.



While our cousins down South are dressing up in serious immersion gear for cold water, we are lucky to enjoy seas of 19C where a lightly insulated top is usually enough to keep us warm.
Starring Greg Schwarz, the resident rolling mentor, in his Tahe Greenland dressed in a Reed tuilik.
The paddles are his creations: hollow core, laminated Western red cedar.




.

FAIL: a list of problems

After a few years of sea kayaking and having owned nothing less than 13 sea kayaks and personally worked on 10 belonging to other people I have seen a few weaknesses in design and manufacture.
The list that follows is my personal experience of actual fails that I have observed up close. Fortunately not all on my kayaks J 

1) The most common failure I had on my composite sea kayaks (I have never owned a plastic one) is cracking of the laminate.
Occasionally the hull of my kayak hit a rock and produced damages of various degrees: on one occasion holing a thin laminated hull with surprisingly very little impact force.
Some other cracks in the hull have occurred from stressing the boat in heavy seas. The cockpit area is particularly prone to stress since there is no deck to create a solid monocoque structure.
The hull under the seat is at its widest and flattest area: compression and flexing of the hull is common even on high-end kayaks. I have reinforced all of my current kayaks (apart from the hard chined Zegul) with a layer of carbon/Kevlar or double bias carbon to strengthen and stiffen a weak cockpit. 

additional layers of carbon/Kevlar in cockpit area
2) The cockpit coaming/deck joint has so far cracked in all my latest kayaks unless reinforced. These days I put a new boat on the “blocks” before it even hits the water. I remove any foam padding in the thigh braces and laminate the area with carbon.
In the boats I have not done so I have eventually stressed the deck enough to create hairline cracks in the deck. When rolling and edging in the surf, the kayak sees a lot of upward pressure from bracing with my thighs. Manufacturers rarely address/reinforce the coaming.  

layers of carbon reinforcing the coaming/deck junction in thigh brace area
3) Speaking of junctions, the other common failure is the seam of the hull/deck. So far none of my kayaks have suffered a leak there but I have seen numerous kayaks without external seams develop a hairline crack that inevitably results in water entering the hatches. Adding a cosmetically acceptable external seam to a friend’s cracking kayak has been very time consuming. I only use epoxy for my work and I finished the seam with a coat of UV resistant black resin. A flow coat would have been easier tho… 


4) And while I talk about cracks I should mention that most kayak manufacturers skip on the design and strength of the deck. The inexperienced might be fooled by a thick lay-up but rarely does he/she realize that glass-poor chopped strand (chopper gun lay-up) is suitable for very tick laminates like in a motorboat but are very poor executions for a sea kayak. Problems start to occur when a person needs to climb on the deck of a kayak in a recovery. So far I have repaired and reinforced half a dozen decks that failed under the weight of paddlers. On the other hand, my very light Chinese kayak has a core laminated deck making it extremely resilient. Other kayaks I now own have fabric instead of just chopped stand in the deck lay-up, and so far have held up very well.  

underdeck hatch cover coaming area reinforced with carbon cloth
5) Leaks to the hatches are often lamented by sea kayakers that paddle in conditions that will see water wash over the deck or proficient rollers that submerge the hatch covers.
I have had a few hatches leak. The most common problem has been water ingress from fittings on the deck.

deck fitting "well" where water pools
The little well where the hardware is bolted to the fiberglass holds water that slowly seeps through to the inside if there is no proper sealing under the nut against the deck. Kayaks that have recessed deck anchors don’t have that problem.
I had leaks coming from the junction of the hatch’s rim where the bonding sealant was not completely encompassing the rim. All it takes is a small section left out and water will seep in.
I have removed poorly fitted hatch rims and resealed them with polyurethane or epoxy glue. 

6) Hatch covers are also prone to leak. So far only Valley and Kajak-Sport hatches have proven to be leak proof in my fleet. All other have leaked, even if often just minimally. Mind you, the Valley hatch covers have a reputation of deteriorating sometimes prematurely. Replacement of those is not cheap. Luckily there seems to be improvements on the quality of the Valley hatches and there are less reports for the need to replace them too soon. Excellent alternative/replacement hatch covers are available from SEA-LECT Designs.

7) While most leaks occur from the top of the deck I have repaired 3 kayaks with leaking bulkheads. On one occasion the seal around the fiberglass bulkhead was not that great: a small amount of epoxy glue fixed the little hole. In two other instances I had to fabricate new bulkheads since the factory ones were made out of closed cell foam. It is just a matter of time before a foam bulkhead will leak. If a kayak is used in waves the hull/deck will flex enough to separate the weak glue that bonds foam to fiberglass (things get really ugly in plastic kayaks). Lifting the kayak by the rear of the cockpit coaming will separate the foam too. To date I have not met anybody with dry hatches in a kayak with foam bulkheads. I would only choose a plastic kayak that has welded plastic bulkheads.

8) Small leaks to the cockpit area usually go unnoticed since water entering through the tunnel of the spray deck is greater than around the coaming junction. There have been however a few cases (not mine) where the rim was so poorly bonded that a low-deck kayak was flooding every half an hour. A large section was left out and not bonded at the factory. I have also observed a brand new, very high-end British kayaks, that had a visibly separating rim. It pays to inspect the new kayak before purchase.

coaming separating from deck
9)  Last but not least leaks can occur from skeg cable housings or rudder lines. I had a badly glassed-in skeg box that leaked substantially. Gel coat concealed the cavity and only a small crack was visible inside the recess. Epoxy glue fixed the problem.
Rudder lines leaks can be a bit trickier. If the housing has worn out (result of constant abrasion of the stainless steel cable by operating the rudder) the water that enters the tube will leak into the hatch. Replacing the cable housing is often a pain. 

10) And while I am mentioning cables I also had a few rudder cables snap on me (that’s when I still used to paddle ruddered boats). The stainless steel wire fatigues and after a while (that depends on how often you paddle) it snaps. It was no fun trying to keep that kayak go where I wanted without a rudder. While I find skegs more reliable (never kinked one myself) I have seen several malfunction. Sloppy workmanship at the factory will create sticky cables. A skeg that has resistance can kink the cable when one forgets to retract it on landing. A smoothly operating skeg will usually just retract without the paddler even noticing. I find rudders on a kayak a weak tool to keep directional stability. While without doubt they are more efficient when one’s goal is to just eat miles, I had a few snap on me when in rough waters. Don’t try reversing in surf with one deployed. I also ruined one being retracted on deck since most retention systems for stowing it on deck are not secure enough for surf work. 

11)  An area of weakness and potential failure can be the carry-handle mounted to the deck. Some kayaks have simple bolt-on (in some cheap plastic kayaks it is just pop rivets) carry handles. Carry handles are not designed to pull a kayak loaded with heavy gear but some handles are secured to such thin laminates that struggle to lift the weight of the kayak alone. In one very bad case I have seen the whole handle rip out of the deck. Needless to say that reinforcing the deck so far in the bow or stern is really difficult. My preferred carry handles are positioned at the very ends of the kayak, with a line threaded through a hole at the seam of the hull/deck. More on grab handles safety issues here 

12)  Last but not least: the seat. I have cracked several seats in my kayaks. Incidentally the seats that failed were thick and heavy. So is there no seat strong enough for my paddling? Yes, there is: a decently laminated one!
I have noticed that most sea kayak seats are constructed with real cheap resin-rich chopped strand. As mentioned before this type of material is not suitable for light applications. The seats that have not failed on me are made from several layers of woven fiberglass, often reinforced in stress areas with Kevlar. Unless a weak hung seat is secured to the bottom of the hull to prevent it from swinging side to side the chopped strand will often not last too long before starting to crack in the corners. Repairing it involves removing the seat and reinforcing it with quality woven fabric. See this article for more info.

There are a couple of other  items that I have seen fail but they are accessories. I will write a separate article on those issues some other time.

Rolling with Stika

The relative warm and crystal clear winter waters of Queensland offer the perfect environment for some fun in a kayak, underwater.

Video: Winter rolling with Stika_coming soon

Photo: Nukilik's bow

Bow of the Zegul 520

GEAR REVIEW: dry bags selection

Dry bag are a pretty much a necessity for sea kayaking. We all want to keep our stuff dry and the easiest way is to do it is in a dry bag. But not all dry bags are the same: the quality and durability varies incredibly.I have used more than 9 brands of dry bags and not all performed equally.
Dry bags come in so many different types, shapes and sizes that one is often puzzled by the choice.
My findings stretch over 15 years of using dry bags, and not just for paddling.
Unfortunately the old adage that says: "you get what you pay for" is not always true.
I had some dry bags that despite costing much more than others performed poorly.

The most critical thing for me is the shape and size of a bag and how well it fits in a sea kayak.
When I transitioned from canoeing to sea kayaking I found that most of the dry bags I owned were too large. For efficiently packing of my gear and food for long trips, small bags fit better in the tight confinements of the hatches.
While a large dry bag will contain obviously more gear and cost less than two smaller ones, I find that dry bags that are larger than 15 liters are not as easy to use as smaller ones. I have a bag of 25 liters that I never use for sea kayaking: it just doesn't fit in my boats.
Since sea kayaks tend to have limited size hatches and the hull shape is long and pointy at the ends, small bags can be arranged easier around the confined space of the hatch. Of course if your kayak is a barge you have to pay much less attention to how you pack. :-)

14 days worth of food for two paddlers
I don't own tapered dry bags since I find the very skinny bow and stern of the kayak suited to store items that don't need to be kept imperatively dry (like tent poles). My favorite size bag is 8 liters.

The material/fabric of a dry bag is very critical in my opinion. The very light ones made from siliconized nylon are not suited for waterproofing items placed in the hatch.
While a decent kayak should have dry hatches most don't. A combination of sloppy workmanship, bad design, user error and deteriorated hatch covers lead to leaks in the supposedly dry hatches.
Items tend to get wet occasionally. Experienced showed me that Silnylon just isn't sturdy enough to prevent being punctured, on the surface of the fiberglass or around camp. Even if some of my kayaks are perfectly smooth inside, the items that the bag contains are often hard and abrade the fabric when jammed inside the hatch.
The clear PVC bags usually seem to offer good protection against abrasion, for a while, but when they puncture they are really hard to repair (I had no luck). Over time mine failed where the fabric folds over at the closure area.
My favorite dry bags are made of woven nylon fabric exterior that have a waterproof coating on the inside of the fabric.
As the bags get dropped on sharp ground and occasionally abraded against the hull, repairing the nylon fabric is extremely easy.

A dob of Seam Grip will patch any leak.
Fabric-type bags also tend to be less bulky when folded over to seal and slide easier when pushed inside the hatch. They also don't have the sticky surface to grab your pots or hard shiny object when cramming them.
Siliconized nylon is however a great material for storing you sleeping bag that should be then placed inside a second dry bag.
Dry bags are NOT submersible and, in the event of a hatch flooding, the water will seep inside a dry bag; so it's good practice to keep the sleeping bag in a double dry bag, especially if the hatches aren't positively sealed.

The ultimate dry bag has two roll-down-buckle closures. The first one will keep most of the water out and prevent a pressure leak on the second one. The second one will prevent any moisture that has crept past the first closure going inside the bag.
These double dry bags are the bomb:


Obviously when backpacking all I need is a decent siliconized nylon dry bag since there is no water pressure on the closure, just potential rain that leaks inside backpack.
Like all fabric items, dry bags require some minimal maintenance: keep them relatively clean and dry.
A bag left wet inside the kayak for a prolonged period of time will develop mould and probably fail prematurely.

My favorite bags:
Sea to Summit Big River, for most of my "hard" gear when sea kayaking (food, utensils, repair kit)
Outdoor Research Durable Dry Sack for clothing and sleeping bags (inside a second bag) when sea kayaking.
Outdoor Research Ultralight Dry Sack for clothing and sleeping bag when backpacking.
I also use some Seal Line bags for items that might have hard items stored (kitchen)

Photo: Norsaqs on the washing line

Norsaqs (rolling sticks) drying on the line after oiling.
Regarded as utterly useless by the "high and hard" (wing paddle) paddling brigade, the Norsaq is a perfect transition tool to learn hand rolling the kayak.
This fine collection of laminated wood Norsaqs is drying on the washing line. Several coats of boiled linseed oil and much polishing will be required before the wood will be silky smooth.
A real practical piece of art that will grace the kayak deck of a connoisseur.

VIDEO: Capricornia Coast_part2

A rocky coast it's like a magnet for me: I'm drawn to it.
There are few things more exciting than paddling in a sea that is surging against the rocks. Obviously when on a trip far away from home and help (and repair facilities) I usually take it easy and try to keep a healthy distance to avoid even the mild chance of holing my kayak.

select 720P if you have fast Internet connection

To see part 1 of the trip click here

.

Cheap advertising

Merrell in its latest contest says:

....
All entries become the exclusive property of Sponsors and will not be acknowledged or
returned. By entering the Contest, you grant Sponsors a perpetual, fully-paid, irrevocable,
non-exclusive license to reproduce, prepare derivative works of, distribute, display, exhibit,
transmit, broadcast, televise, digitize, otherwise use, and permit others to use and perform
throughout the world the Artwork and any digital depiction or representation thereof in any
manner, form, or format now or hereinafter created, including on the Internet, and for any
purpose, including, but not limited to, advertising or promotion of Sponsors and their goods
or services, and to use your name, likeness, and photograph in connection therewith, all
without further consent from or payment to you.


If one wins the contest he/she gets awarded $5000 towards a trip run by the promoter's chosen agency.


So, if my calculations are right, Merrell is legally appropriating thousand of images that later can be used at their own discretion. Merrell wants to avoid paying top dollar to Image Banks for a non exclusive rights to stock images  (a commissioned photoshoot usually doesn't yield those unique images).
So why not run a contest instead?
I know, most of the images submitted probably are junk but I noticed some really good ones amongst the trash ones.  The contest itself is great advertising for Merrell and at the same time they get awesome images for peanuts.
A win-win situation. People just don't realize the real value of a good image and give them away for pretty much free. Vanity and gullibility drives these contests.